Protect your home with the Solight combined detector, which provides early warning of dangerous carbon monoxide (CO) as well as flammable gas leaks (natural gas, propane, butane). Thanks to the digital display with values in ppm, LED indication, and a loud 85 dB siren, you get an immediate overview of the situation. Power is supplied from the mains with the option of a backup 9V battery.
Combined protection: CO and flammable gases
One device monitors carbon monoxide (CO) and flammable gases (natural gas, propane, butane). For CO it uses an electrochemical sensor (alarm 30–999 ppm); for flammable gases it uses a catalytic combustion sensor (alarm 2,500 ppm).
Display and instant warning
The digital LCD shows the measured values, and in case of danger 3× LED indication and an 85 dB siren are activated, so you are informed about the risk immediately.
Mains power with backup and wall mounting
The detector is powered from the mains AC 90–240 V / 50–60 Hz and supports a backup rechargeable 9V battery (not included). Designed for wall mounting – screws are included in the package.
The combined CO and flammable gas detector offers maximum protection at home and at a cottage. The device uses an electrochemical sensor for CO and a catalytic combustion sensor for flammable gases, contributing to high measurement accuracy. The clear digital display shows the currently detected values, and in the event of risk it alerts you with both light and sound signaling.
Power is supplied from the mains (AC 90–240 V) and, for increased safety, a backup rechargeable 9V battery can be used (not included). The detector is designed for wall mounting – screws are included in the package.
Main advantages:
- Combined detection: carbon monoxide (CO) and flammable gases
- Digital display with value readout
- 3× LED indication (Power / Fault / Alarm) and an 85 dB siren
- Automatic fault detection
- Approved to standards EN 50194-1:2009 and EN 50291-1:2018
Specifications
- Type
- Combined carbon monoxide (CO) and flammable gas detector
- CO sensor
- Electrochemical
- CO alarm
- 30–999 ppm
- Flammable gas sensor
- Catalytic combustion
- Flammable gas alarm
- 2,500 ppm
- Display
- Digital, display of detected values
- Indication
- 3× LED, 85 dB siren
- Fault detection
- Automatic
- Operating time on backup battery
- 2 h operating mode / 30 min alarm
- Mounting method
- Wall (screws included in the package)
- Approvals / standards
- EN 50194-1:2009, EN 50291-1:2018
- Operating temperature
- 0 °C to +50 °C
- Operating relative humidity
- 10% to 95%
- Storage temperature
- −10 °C to +50 °C
- Power cord length
- approx. 1.35 m
- Mains power supply
- AC 90–240 V / 50–60 Hz
- Backup power supply
- Rechargeable 9 V battery (not included)
- Dimensions
- 112 × 73 × 42 mm
- Weight
- 175 g
