Lightweight industrial Lanberg switch for demanding installations where reliable data transmission and power over a single cable are required. It offers 8× Gigabit RJ45 with PoE (including 4× PoE++ 802.3bt up to 90 W), 2× SFP uplink, VLAN and EXTEND up to 250 m modes, and a durable metal housing with passive cooling for 24/7 operation.
PoE++ up to 90 W per port for demanding devices
Thanks to IEEE 802.3bt (PoE++ / 4PPoE Type 4), the switch can power higher-draw devices as well – e.g. 4K cameras with IR illumination and heating, high-performance access points, or automation components. The total PoE budget of 120 W makes it easier to safely plan power for the entire installation.
8× Gigabit PoE + 2× SFP uplink for flexible topology
The switch provides 8× 1Gb/s RJ45 with PoE for end devices and 2× SFP 1000BASE‑X for uplink between network segments or longer runs (depending on the selected SFP module). Ideal for interconnecting cabinets, camera points, or remote nodes.
VLAN and EXTEND modes + rugged industrial design
VLAN helps separate traffic between ports and increase installation security. EXTEND mode enables up to 250 m over a single cable run (with speed limited to about 10 Mb/s). The metal construction, passive cooling, and DIN-rail mounting are designed for harsh environments and 24/7 operation.
Lanberg ILGE-8P-2S-120 is an unmanaged (plug & play) industrial PoE switch designed for distributed infrastructure – from automation and SCADA through IoT to outdoor and indoor CCTV monitoring. Thanks to the combination of gigabit ports, high PoE output, and rugged design, it is ideal for locations where continuous operation and higher stability requirements are expected.
Main benefits in practice:
- 8× 1Gb/s RJ45 with PoE for cameras, access points, recorders, sensors, and controllers
- 4× PoE++ (IEEE 802.3bt) up to 90 W/port + other ports in PoE/PoE+ (802.3af/802.3at) mode
- PoE budget 120 W for planning total installation power
- 2× SFP 1000BASE‑X uplink for fiber/ethernet interconnection over longer distances (depending on the SFP module used)
- VLAN for practical port separation and limiting broadcast traffic
- EXTEND to extend cabling up to 250 m (at the cost of reducing port speed to about 10 Mb/s – especially suitable for camera systems)
- Redundant power input – option to connect two power sources for higher availability
- Intelligent PoE port shutoff when exceeding available PoE power (starting from the highest-numbered port)
- Automatic MDI/MDI‑X, auto‑negotiation, Flow control, MAC auto‑learning
The rugged metal enclosure and passive cooling support long-term stable operation in switchboards and industrial cabinets. The switch is intended for DIN-rail mounting. A power supply is included in the package.
Specifications
- Device type
- Industrial Ethernet switch (unmanaged, Plug & Play)
- Number of RJ45 ports
- 8× Gigabit Ethernet (1 Gb/s) with PoE
- PoE standards
- IEEE 802.3af (PoE), IEEE 802.3at (PoE+), IEEE 802.3bt (PoE++ / 4PPoE Type 4)
- PoE++ ports
- 4× PoE++ BT, up to 90 W per port
- PoE budget
- 120 W
- Uplink ports
- 2× SFP slot (1000BASE‑X)
- Modes / features
- VLAN, EXTEND (up to 250 m at approx. 10 Mb/s), Flow control, automatic MDI/MDI‑X, MAC auto‑learning, intelligent PoE port shutoff on overload
- Switching method
- Store-and-forward (CRC checking)
- Power
- Redundant power input (option to connect 2 power sources); power supply included
- Mounting
- DIN rail
- Construction
- Metal chassis, passive cooling
- Operating temperature
- -25 to 65 °C
- Operating humidity
- 10–90%
- Surge protection
- 6 kV
