Practical condensate collector for ventilation ducting with a diameter of 125 mm made of durable ASA plastic. Reliably handles condensate drainage in areas with large temperature differences, for example from kitchen hood vapors. Offers easy push-in installation and long service life thanks to UV resistance.
The 125 mm condensate collector is designed to capture and control the evaporation or drainage of condensate in ventilation systems where it forms due to temperature differences. Ideal for duct runs routed through cold spaces or the roof, for example when venting a kitchen hood. ASA material provides high resistance to UV radiation and weathering.
Installation is quick and hassle-free — simply push it into a standard pipe and seal the joint with tape or silicone. Depending on route conditions, multiple collectors can be used for effective protection of ducting against moisture and dripping condensate.
- 2 condensate handling methods:
- Knock out/drill the partition in the drain spigot and route to a DN 32 wastewater line.
- Leave the partition in place for gradual evaporation in the evaporation chamber. - Suitable solution for sections with cold air ingress, especially when the hood is off.
- Compatible with standard 125 mm HVAC ducts.
Specifications
- Diameter
- 125 mm
- Material
- ASA plastic with high UV resistance
- Installation
- Push into standard pipe, seal with tape or silicone
- Condensate removal methods
- 1) Drill/knock out the partition in the drain spigot and route DN 32 to the wastewater line; 2) Leave the partition and allow evaporation in the evaporation chamber
- Intended use
- Condensate drainage and capture in HVAC systems, e.g., kitchen hood vapors routed through the roof
