Axagon HMC-12GM2 USB-C hub 12-in-1 with M.2 NVMe/SATA, 10 Gb/s, HDMI/DP 4K 60 Hz, GLAN, SD/microSD, audio, PD 100 W


























Axagon HMC-12GM2 USB-C hub 12-in-1 with M.2 NVMe/SATA, 10 Gb/s, HDMI/DP 4K 60 Hz, GLAN, SD/microSD, audio, PD 100 W
Create a compact workstation with a single cable. The hub offers 3× USB-A (2× 5 Gb/s, 1× 10 Gb/s) and 1× USB-C 10 Gb/s for fast peripherals and external drives. Connect displays via HDMI and DisplayPort up to 4K/60 Hz — either individually or simultaneously, including support for HDR and high gaming refresh rates (2K/144 Hz, Full HD/240 Hz). A dedicated USB-C PD 100 W pass-through power port saves a port on your notebook.
The integrated M.2 slot turns the hub into an external SSD enclosure — compatible with NVMe and SATA, M-key and B+M-key cards in sizes 2242 and 2280. Supports UASP, TRIM, S.M.A.R.T. with no capacity limit. A stable connection is ensured by Gigabit Ethernet, photo transfer is accelerated by the SD/microSD reader (simultaneous use of both slots), and there is a combined 3.5 mm audio jack for headphones/microphone.
The elegant aluminum body with passive cooling is complemented by a quiet integrated fan for the SSD and hub. The detachable 50 cm USB-C cable can be replaced with a longer one. Plug & Play, Hot Plug, and broad compatibility with Windows, macOS, Linux, Chrome OS, and Android ensure quick setup. An ideal accessory for ultrabooks with limited port selection.
- 12-in-1 docking solution for work and play
- 4K/60 Hz via HDMI and DP + HDR, multichannel audio
- USB 10 Gb/s for fast SSDs and peripherals
- M.2 NVMe/SATA bay with UASP/TRIM/S.M.A.R.T.
- Gigabit LAN, SD/microSD with parallel reading
- PD 100 W pass-through laptop charging
- Aluminum + active cooling, detachable 50 cm cable
Specifications
- Input
- USB-C 10 Gb/s (USB 3.2 Gen 2), compatible with Thunderbolt 3/4
- Host connection
- USB-C female (reversible)
- USB ports
- 1× USB-A 10 Gb/s, 2× USB-A 5 Gb/s, 1× USB-C 10 Gb/s (data), 1× USB-C PD (power only)
- Concurrent drives
- Ability to keep two external drives connected permanently
- Video outputs
- 1× HDMI (A female), 1× DisplayPort (female)
- Max video resolution
- Up to 4K (4096×2160) at 60 Hz on each port; with two monitors up to 4K/60 Hz on both
- Video requirements
- Host USB-C with DP Alt Mode 1.4+ or Thunderbolt 3/4; up-to-date OS and GPU drivers
- Video features
- HDR (10-bit), Hot Plug Detect, TMDS, HDCP 1.4/2.3, up to 8‑channel LPCM/AC-3/DTS/HBR, up to 192 kHz/24‑bit (device-dependent)
- Power Delivery
- PD 3.0 pass-through, up to 100 W (20 V/5 A); requires PD support by host and charger
- Card reader
- 2 slots: microSD (microSD/HC/XC) and SD (SD/HC/XC, MMC 4.0 etc.); simultaneous operation of both slots
- Card specs
- SD 1.0/1.1/2.0/3.0 (up to 2 TB), UHS-I (SDR12/25/50/104, DDR50) up to 104 MB/s, ECC/CRC, 2 LUN, card-to-card copy
- M.2 bay
- NVMe and SATA M.2 SSD; M-key or B+M-key cards; sizes 2242/2280; single- and double-sided
- M.2 standards
- PCIe Base 3.1a, NVMe 1.3, SATA 3.2 (6 Gb/s), USB Mass Storage Class
- M.2 features
- UASP, TRIM, S.M.A.R.T., boot support (OS-dependent)
- LAN
- Gigabit Ethernet RJ-45 (10/100/1000 Mb/s), IEEE 802.3/802.3u/802.3ab, auto-negotiation
- LAN advanced
- IPv4/IPv6 COE, TCP LSO v1/v2, 802.1p, 802.1Q VLAN, 802.3az EEE, Jumbo Frames, full/half duplex with 802.3x, Auto MDI/MDIX, HW CRC, Pair Swap/Polarity/Skew, Wake-on-LAN (Magic Packet, Microsoft, ECMA-393, RealWoW!, Link Change)
- Audio
- 1× 3.5 mm combo jack; stereo output 48 kHz/16-bit; mono microphone input 48 kHz/16-bit
- Other features
- USB 3.2 Gen 2 10 Gb/s, backward compatible with Gen 1 (USB 3.0), Hot Plug, Plug & Play, standby
- Power
- From USB bus or via PD charger
- Construction
- Aluminum body, passive cooling + quiet integrated fan, M.2 activity LED
- Cable
- Detachable 50 cm USB-C cable, shielded
- OS compatibility
- Windows 10/11+, macOS, Linux, Chrome OS, Android (functions depend on device manufacturer support)
- Requirements
- Updated graphics drivers recommended for flawless video functionality