LAN cable UTP 100 Mb/s 305 m CCA yellow
99108-1
1 / 2
35,90 €
UTP LAN cable 305 m, CCA, AWG 24, 100 Mb/s, yellow RAL1028. Unshielded, meter markings, PVC jacket. Ideal for short runs without Fluke certification.
1 / 2
LAN cable UTP 100 Mb/s 305 m CCA yellow
99108-1
UTP LAN cable 305 m, CCA, AWG 24, 100 Mb/s, yellow RAL1028. Unshielded, meter markings, PVC jacket. Ideal for short runs without Fluke certification.
35,90 €
Reliable network cable for basic installations: UTP unshielded, speeds up to 100 Mb/s, length 305 m, CCA conductors (solid), color yellow RAL1028. Ideal for short runs with no certification requirements.
This UTP LAN cable is suitable for economical, simple data cabling with speeds up to 100 Mb/s and frequencies up to 100 MHz. The CCA (copper-clad aluminum) and solid construction ensures easy termination, with clear meter markings along the length.
The unshielded U/UTP design is ideal for environments with low interference. The cable comes in practical cardboard packaging and has a yellow RAL1028 color for clear route identification.
- Recommended use: short runs up to approx. 10 m, installations without a Fluke certification requirement (EN 50173)
- Construction: AWG 24, 4 pairs (4×2×0.5 mm), HDPE conductor insulation, PVC jacket 5.0 mm
- Easy installation: meter-by-meter markings along the entire length for precise measuring
Specifications
- Cable type
- LAN U/UTP (unshielded)
- Data rate
- up to 100 Mb/s
- Pack length
- 305 m
- Conductor
- CCA, solid wire
- AWG
- 24 (4×2×0.5 mm)
- Color
- yellow RAL1028
- Length marking
- Meter markings along the entire length
- Jacket
- PVC, 5.0 mm diameter
- Conductor insulation
- HDPE, 0.93 mm
- Operating frequency
- up to 100 MHz
- Packaging
- Cardboard
- Electrical parameters (20 °C)
- Conductor resistance (max.): 60–90 Ω / 305 m
- Insulation resistance (min.)
- 5000 MΩ·km
- Pair-to-ground capacitance
- < 330 pF / 100 m
- Characteristic impedance
- 100 Ω (±15%)
- Storage/transport temperature
- 0 to 60 °C
- Operating temperature
- −20 to +70 °C
- Recommended max. segment length
- 100–120 m (general), recommended to cut into ≤10 m runs
- Standards and limitations
- For installations without Fluke certification requirement (EN 50173)
Similar products
